TurboApp allows you to seamlessly board new merchants directly to Paysafe, with options for the Fiserv Omaha, Fiserv North, and TSYS platforms. To set up the integration, please see this article: Paysafe Integration Guide

 

Starting TurboApp

To board an account in TurboApp, we recommend clicking the Board Merchant button on the lead:

When you board a merchant to TurboApp from a lead, the lead field info, attached files, and assigned users will automatically populate into the new TurboApp record based on the TurboApp field mappings.

To start a new and empty TurboApp application, navigate to TurboApp > New Application in the top navigation bar. When you're starting a new application from the top navigation bar, you will need to enter all of the information and settings manually. This method is only recommended if you don't already have a lead to go with the account, but that should not be common.

The New Application page will open as shown in the below example:

Select the appropriate options in the initial drop-down menus and click the Start Application button to launch your new application.

Note: If you have multiple processor integrations enabled, then make sure to select Paysafe in the first drop-down menu on the page. 

The application process consists of several steps which take about 5 minutes to complete.

If needed, you can leave at any point and find the saved record under TurboApp > Incomplete Apps.

 

Step 1. Upload Files

In the first step of the application process, you will need to upload your Merchant Processing Agreement and a Void Check to the TurboApp.

If the void check is included in the Merchant Processing Agreement, then you may only upload the first file (and select the Check is included with Application checkbox).

If needed, you may also upload additional supporting documents to be included with your application. Once all required documents have been selected, click the Upload Files button.

After the files have been uploaded successfully, the application will move on to the second step.

Below is a screenshot of the Upload Files page:

 

 

 

Step 2. Corporate Information 

In the second step, you'll need to enter the corporate information on the merchant that's being boarded. 

Note that most of the fields on this page are required and you'll need to fill all of them in. The following fields are not required: Suite#/Floor#, Advertising Methods, Comments for Underwriter, Fax #, Website.

If you omit to fill in a required field, then a warning message will appear when you try to move on to the next step:

 

 

 

Tip: After entering all necessary data in the Corporate Information section, you can copy the name and address fields from that section into the Location Information section using the Copy Corporate Information button:

 

 

After all of the required and relevant data has been entered, click the Next button to proceed to the next step. 

Below is a screenshot of the Corporate Information page:

 

 

 

Step 3. Location Information

In the third step, you will need to enter information into the following five sections:

1. First Owner (personal data on the principal business owner)
2. Signature Information (IP address and browser information)
3. Deposit Information (merchant's banking and processing data)
4. Credit Card Sales and Return Policy (required info on the merchant's sales methods and refund policies)
5. Equipment Configuration (gateway, software, and terminal options)

Here are a couple of notes about some of the special fields you'll find in the above sections:

• If there is more than one owner, then after you select the Yes option under the "Second Owner" label an additional section will automatically appear where you can enter the information on the second owner. 
• The percentages in the four fields shown under the "% of Credit Card Payments from" and the "Products and Services delivered in" labels must add up to 100%. If the totals do not add up to 100%, then the automatically calculated totals shown below the fields will be shown in red color, and you will not be able to move on to the next step until correcting the percentages. 
• When you enter the routing number in the ABA Routing # field, the Bank Name field will auto-populate with the name of the bank. 
• To add a Gateway, Software, or a Terminal to the application, click on the appropriate button in the Equipment Configuration section, and then select the required equipment options and add the equipment to the application. 

Below is a screenshot of the Location Information page:

 

 

 

Step 4. Rates & Fees

In the fourth step, you can customize discount rates and fees for each of the four major card types and choose additional services such as PIN-Debit, EBT, and others.

First, select from one of the three available Pricing Formats:

 

 

The Enhanced Recover Reduced (ERR) Credit and Debit discount rates are usually in 1.xx to 2.xx range.

The Pass-Through Interchange Credit and Debit discount rates are usually below 1.00 %.

The Tiered Credit and Debit discount rates are usually above 1.00 %.

Depending on what you've selected, the rest of the page will automatically change and show the fields specific to that pricing format. 

Note that the different sections of the page contain accordions which you can expand in order to select additional options or fill in additional information.

Also, when you select some of the options on the page (such as the Additional Services), additional fields and options will appear which you can fill in. 

Once you have entered all the desired data, click Next to proceed to the last step of the application process. 

Below is a screenshot of the Rates & Fees page:

 

 

 

Step 5. Submit To Paysafe

In the last step, you can review your data and make additional edits before submitting.

Scroll through the data via the Review Panel and check that everything is in order. If you come across any fields or sections you would like to edit, you can jump back to the desired section by clicking the button for the applicable page (located at the top of the page).

If you would like to print the page or save it as a PDF, click the Print button and select the desired settings. You can also open a dialog that will allow you to link Users or change the Sales Rep by clicking the Options button.

Below is a screenshot of the final Submit To Paysafe page:

 

 

Once you have verified all data is accurate click Submit For Review, then select the Terms & Conditions checkbox, and finally click Submit Application:

 

 

If there is an error blocking the submission, a red text describing the location and specific problem will appear above the Submit Application button:

 

 

After correcting the issue, return to the Submit page, select the Terms and Conditions checkbox again, and click the Submit Application button.

If there are no additional errors, you will see a message informing you that the application was submitted successfully: